Hull Planking Clamp (6)
 |
|
|
|
click to enlarge
|
StockStock availability for on-line ordering 
StockStock availability for pick up
This live feed
information is to be used as a general guide to current inventory. There is no guarantee of
availability.
FEATURES
Laser cut plywood planking clamps eliminate unsightly holes in you blukheads, and you won't waste time screwing in and removing threaded planking clamps. They also hold you planks firmly in place while you glue, drill, measure and taper.
Each clamp is 1" square, and includes a metal screw with wing nut and two 1/16" diameter Brass support rods. Assembly required.
Set of 6. Use with bulkheads less than 3/16" thick.
810084411988 0810084411988
MX103